We provide commercial roof repair services in Evansville and five nearby towns: flat roof, metal roof, leak, and industrial roof repair, each priced after an on-site inspection.
Our commercial roof repair services in Evansville split by roof type and by problem. Each card lists the repairs that service handles most.
Membrane and built-up roofs that hold water, open at the laps, or bubble in summer heat. Patches match the existing sheet, and drains get rebuilt where water has been standing around them.
Typical Repairs
Steel roofs with loose screws, rusted panels, lifted trim, or laps that have spread. Panels are matched by profile and gauge, and framing gets checked from below before new metal goes on.
Typical Repairs
Water coming through right now, on any roof type. We start at the stain inside, follow the path up to the roof, and repair the detail where the water enters.
Typical Repairs
Plant, warehouse, and terminal roofs with exhaust, heavy units, and long runs. Work runs around shifts, with interior protection and safety setups near running machinery.
Typical Repairs
Match the sign at your building to the service that usually handles it. A roof walk confirms it before any price is written.
| What You See | Where It Usually Starts | Service | First Step |
|---|---|---|---|
| Water ponding for two days or more | High drain, sagging deck, crushed insulation | Flat Roof Repair | Map the low spots and check the drain bowl |
| Bubbles in the membrane | Trapped moisture between layers | Flat Roof Repair | Cut a core beside the blister |
| Rust trails under screw rows | Split washers and backed-out screws | Commercial Metal Roof Repair | Check fasteners along the whole run |
| A stain that moves after each storm | Seam, boot, or curb upslope of the stain | Commercial Roof Leak Repair | Trace the path from inside |
| Leaks near exhaust or heavy units | Cracked curb corners and duct flashing | Industrial Roof Repair | Walk the equipment rows with plant staff |
| Water at an outside wall | Coping joints and parapet base flashing | Commercial Roof Leak Repair | Water-test the coping and wall face |
Call with the spot where water lands inside. We ask what sits above it and plan the trace before we arrive.
Call UsSend photos or a short note on the roof. We book an inspection and come back with a written scope.
Get An EstimateEvery service on this list follows the same order, from a single drain repair to a plant roof with dozens of units.
A roofer walks each section with a moisture meter, checks drains, curbs, and edges, and photographs every problem for your file.
The roof type and where water gets in decide whether this is flat roof, metal roof, leak, or industrial repair work.
Cores around the damage show how far wet insulation reaches, so the scope covers the whole problem and nothing more.
You get a written price by repair area, listing materials, flashing details, and any insulation that comes out.
After the repair, we water-test where it makes sense and send photos showing each finished area.
Answers on choosing a service, scheduling, and the paperwork that follows a repair.
Choosing A Service
Both problems get handled on one visit. The leak trace finds where water enters now, and the metal roof repair covers the screws, laps, and panels around it. You get one scope that lists each repair by area, so the work can be done together or in stages.
Yes. Most of our work is on roofs another contractor put on. We identify the system, match the membrane or panel profile, and note any earlier repairs that failed so the new one ties in cleanly with what is already there.
Once cores show wet insulation across a large part of the roof, or seams fail faster than they can be patched, repair costs start to approach a re-cover or replacement. We price the repair and point out when that line is close, so you can decide with both numbers in front of you.
Scheduling
That depends on the weather, material, and how the building runs. Small patches and re-flashing often go on during the next dry stretch, while larger section rebuilds need materials ordered. The written scope gives a working plan for each area so you can set it around deliveries and staff.
Usually, yes. Most repairs stay above the deck, and openings are closed before the crew leaves each day. Noisy work, adhesive odor near air intakes, and lift traffic in the lot get scheduled around your hours, with protection set below any opening.
Building permits in Evansville and Vanderburgh County go through the Evansville-Vanderburgh County Building Commission. Small repairs can be handled differently from larger reroofing work, so we confirm what the office requires before a larger repair is scheduled and note it in the scope.
Paperwork
You receive before and after photos, the location of each repair on a roof sketch, the materials used, and any problems we saw but did not fix. Keep it with the building file. Lenders, insurers, and the next roofer all ask for this kind of record.
Check the warranty terms before work starts. Some manufacturers require repairs by approved installers or with their own materials, and some ask to be notified. Send us the warranty paperwork if you have it, and we plan the repair around its conditions.
Tell us about the building and what the roof is doing. We start with a roof walk and give you a written scope for each repair.
Or call (930) 346-3218
